If you plan any home décor DIY project, knowing how to drill a hole in the wall is a must! This skill comes in handy whether you want to make a small, crafty change to your room or a whole-house renovation.
Of course, the best tool to drill through a wall is – you’ve guessed it – a drill. Using it sounds pretty straightforward, but the equipment itself won’t guarantee an excellent finish. If you don’t know how to drill a hole in the wall accurately, you can only waste a lot of time and material. This is why we have created this guide to teach you how to create a hole in almost any surface. Let’s get started!
No matter what material you plan on using, you have to take specific precautions and measures. First off, remove any loose clothing and jewelry you might be wearing, as a drill can get tangled in it. Use goggles and protective gloves to stay safe from flying debris and fragments. A dust mask is also an excellent protective item, as it will prevent you from inhaling any harmful particles. We’d also recommend using ear muffs. Drilling sound can cause damage to sensitive ears.
At the same time, make sure there are no pipes or cables behind the walls or other items you can damage. Drilling into electrical vires or pipes can cause electrocution or floods. If you want to be sure there isn’t anything underneath the thick walls, use a wire and pipe detector! It will precisely show you where you shouldn’t drill.
How to Drill a Hole into a Brick Wall
Drilling a hole in the brick wall is not an easy task. If you plan on completing it, make sure you have a powerful enough drill. If you could use a hammer drill or a rotary hammer, this would be the best idea. This way, you can use their rapid hammer features to fracture the surface of the wall. Just make sure to drill a shallow hole on the weaker setting fist! This will make everything more precise. Regular drills are usually not strong enough to handle such a task.
If you plan to hang something on the wall, you should always use a raw plug to secure it. A screw most likely won’t be strong enough to handle the weight by itself. Try to drill between the bricks, as the mortar will be easier to pierce through. Simultaneously, if you drill directly into the bricks, you can weaken the structure of the wall, and the brick might shatter.
Drilling a more massive hole – if you want to place the pipe through the wall, you should use a core bit. It can cut the diameter of a hole, enabling you to create a bigger one. Also, never drill too deep! This can lead you to lose the anchor in the wall. Make sure your drill doesn’t get too hot and cool it with cold water now and then. Just make sure the drill’s body gets wet!
How to Drill a Hole into a Concrete or a Stone Wall
Concrete is one of the most common wall materials. If you want to hang a new picture, then you have to know how to drill a hole in the wall made of this material.
The process is relatively similar to drilling through a brick. Once again, using a hammer brick will ensure a better result. You can get good results with a metal-bonded diamond drill bit, as well. Also, if you want to use screws or fittings, you will require masonry drill bits.
Using low power settings, drill a shallow hole first, then enable the hammer action, or other high power settings. If you require a bigger hole, drill a smaller one first, then finish it off using a more significant bit. Make sure you retract the drill every few seconds, to remove the dust and other particles. If you run on a hard patch, don’t drill through it! Use a hammer and a nail to break through it.
How to Drill a Hole into a Wooden Wall
Drilling through the wood is more comfortable than the previous two materials. Also, this technique is more beneficial, as several DIY projects require drilling through a wooden surface.
You can use a standard drill for this material, but you can always use some specialized bit if you’d like. Make sure you know how big of a hole you need, then mark the place on the wood. You can always clamp everything to make the result more precise.
Start drilling at the slower setting, then increase the speed as you go deeper. This will ensure precision. Don’t put too much pressure on the tool – the drill should guide you. As wood tends to crack a little bit, smoothen the edges with some deburring tool or sand it.
If you have to make a straight hole – use an old CD! Yes, you’ve read that correctly. Place the hole of the CD over the place you’d like your hole to be, and make sure the reflective surface is facing upwards. If the drill is in line with its reflection, you know you are creating a perfect hole!
How to Drill a Hole into Tiles
If you have to drill a hole inside your bathroom, you’re likely to have to drill through tiles. To prevent the tiles from breaking, use a carbide-tipped or a diamond drill bit. As the tiles are very delicate, you have to be extra careful! Put masking tape over the wall if you want some added safety. Drill very slowly at first, applying minimal pressure, then make it faster. Once you’ve drilled through the tile, make sure you lower the pressure to drill through the drywall. If you make a mistake now, you can’t fix it.
Also, drilling through tiles can create a lot of debris, so make sure you are using all the safety gear we’ve mentioned!
If you know how to drill a hole in the wall accurately, you don’t have to call the repairman for mundane tasks! The process isn’t complicated, and the tools aren’t too expensive. All it takes is a little bit of patience and a pair of steady hands. By following this guide, you can become a professional in this handy skill!